Announcement

Collapse
No announcement yet.

kenmore icemaker stopped working

Collapse

Forum Top GA Ad Widget

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kenmore icemaker stopped working

    I have a kenmore refridge model 106-56532400 and the icemaker is 8 cube W10122502rim597 stopped working. Optics OK. when I jump the T&h it does fills with water, stops, freezes and dumps the ice but wont cycle again unless I jump it again. if i open the freezer the optic lite flashes 2 pause 2 pause. if I close the flapper the lite comes on steady!

    Help Sal Avitabile Thank You

    PS there was a ice cube jamming the fingers in the beginning
    Last edited by Dan O.; 05-05-2011, 04:35 PM. Reason: changed font size

  • #2
    when I jump the T&h it does fills with water, stops, freezes and dumps the ice but wont cycle again unless I jump it again.
    What is the temperature in the freezer and is there anything hampering air flow over the icemaker?

    Jumping T and H simulates the closing of the internal icemaker thermostat's contacts. If the freezer was too warm (it should be between 0° and -5°F for an icemaker's best functioning - water freezes at only 32°F) or there is poor air flow over the icemaker, the icemaker's thermostat may not close to start another cycle. Either that or that thermostat may be defective.

    LINK > Icemaker Thermostat

    LINK > 1 oz. Thermal Mastic, thermostat mounting (no pic)

    LINK > Replacement Icemaker Asm.

    LINK > Replacement Icemaker Asm. (alt. supplier)

    JMO

    Dan O.
    www.Appliance411.com
    The Appliance Information Site

    =D~~~~~~

    Comment

    Working...
    X