I noticed that the freezer on our GE Profile side by side refrigerator was not working (thaw process started). Also the temperature display was not lit up.
I unplugged fridge, removed back panels, cleaned the condenser (fairly dirty).
Left unplugged for a while and plugged in to see what happened.
Results:
Display lit up, Condenser fan ran and compressor started (sounded fine with quiet hum). This lasted from 1 to 5 seconds and would kick out and display would go dead as well.
Repeated this a number of times with same results. Time of compressor run would vary with length that fridge was left unplugged.
Any Thoughts?
I unplugged fridge, removed back panels, cleaned the condenser (fairly dirty).
Left unplugged for a while and plugged in to see what happened.
Results:
Display lit up, Condenser fan ran and compressor started (sounded fine with quiet hum). This lasted from 1 to 5 seconds and would kick out and display would go dead as well.
Repeated this a number of times with same results. Time of compressor run would vary with length that fridge was left unplugged.
Any Thoughts?
Comment