No Display on GE Oven Electronic Control

[skoro]

I have a GE Profile J2B915SEH1SS Dual Fuel Convection Oven. Electronic Control Panel has no lights and unresponsive to touch. Power is ok - internal light works as does stove ignition.

Is this likely to be a bad ECU or possibly a fuse or other common problem?

[Dan O.]

Electronic Control Panel has no lights and unresponsive to touch. Power is ok

You checked for power to the control itself or are you just stating the appliance has power going to it??

Is this likely to be a bad ECU or possibly a fuse or other common problem?

There are not usually any fuses for the electronic control but you can check your range's wiring diagram to be sure. Basically, if power IS getting to the control but the control NOT functioning, the control itself is the likely problem.

LINK > GE J2B915SEH1SS Electronic Control (no pic)

LINK > GE J2B915SEH1SS Electronic Control (w/pic)

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~

[skoro]

I confirmed that power was to the controller. Purchased a new unit on-line, installed and functioning correctly.

Thanks for the assistance.

[Dan O.]

Fixed

installed and functioning correctly

Glad to hear it. Thanks for the follow up.

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~