Recessed light - space between trim and ceiling, how to fix this problem?
-
-
if the sheetrock work was done professionally there will be no space between the can and the ceiling "rock" the trim plate [i.e. - bezel] fits by means of two spring clips inside the can and holds it against the finished ceiling. the inside lip of the bezel goes inside the can. if you have a space between the can and the "rock" use some mud or plaster of paris to seal the gap. plaster of paris sets up rock hard so be careful with it. -
Very often you can adjust the cover. :Look up inside the recessed can and see if there are two little wing nuts and a slot.
Little about a lot and a lot about a little.
Every day is a learning day.Comment
Comment