Wiring a Leviton Combo 2-switch

[Dustinv1]

Having some trouble figuring out how to wire this switch. Here's the deal:

This switch is originally an end-of-run that controlled 1 light over the sink in my bath. I ran a 14-2 to a newly installed fan/light combo (both fan and light to come on at the same time when the switch is on) from this box and was hoping the combo 2-switch would do the trick, but I'm having a heck of a time figuring it out.

Any help?

[HayZee518]

first question, is there a neutral in your box? Next question, is there just one cable in your box?

[Dustinv1]

No, there was no neutral, and only 1 wire coming into the box. After I put my thinking cap on I realized that it wasn't possible as the switch loop creates 2 hots, no neutral. I ran another line from a different box. All is well now, except the 3 hours it took to run the line!

Let me know if I could have done it a differnt way...