I am confused about changing the Pad D filter in this furnace. There are 2 sides to the pad - on side is denser and seems that it would not allow as much dust to pass through. Which side faces the inside of the furnace?
-
-
Tepierce; Welcome to the Forum... Are you sure there is no "air-flow" arrow? Normally the DENSER side will be closest to the INTAKE side of the FAN. Hube -
There is an arrow pointing down that says "fan direction". This filter is a large unframed piece of filter that goes around a u-shaped metal screen which slides in and out of the furnace. One side would be closest to the fan and one side would be farthest away.
Comment
-
The arrow should be installed pointing into the fan intake. HubeComment
-
Has anyone had an occurrence of a Laser 730 or 731 over firing?
The top of the heat chamber and the heat exchanger glow red on high when this occurs....
Comment