monitor 441 flame jump, whossing sound

[HayZee518]

If you have FACEBOOK, type Monitor Heaters into the search bar and hit ENTER. There are several repair places that do Monitor motherboards.

[hawkins111]

With out a burner cloth your stove will never run correctly. The fuel will puddle on the bottom and the flame will be very high in the pot. You must use a burner cloth on a M 441.

Tom

[mahrkus33]

Thanks I will check out selenide damper.

[mahrkus33]

Maybe the burner mat is bad, sounds like its time to inspect the combustion chamber,

I had had the unit rebuilt two years ago and when they rebuilt it they said they don't put the burner mat in any more.
i took it apart and did my usually pre season inspection / cleaning.
it started doing the flare up last spring.
thanks

[hawkins111]

I would look at the solenoid damper. More than likely you will have to do the burner cloth and ring as well. Tom

[akaothermick]

Maybe the burner mat is bad, sounds like its time to inspect the combustion chamber,

[mahrkus33]

My monitor 441 flame jumps and makes a whossing sound when burner is on low headed to high and when going from high to low. when running on high it does not do it.
it almost acts like a drop of fuel is hitting bottom of burner and igniting.
any suggestions or ideas on what it could be?
thanks