hawkins111
Journeyman
Last Activity: 01-14-2025, 06:43 PM
Joined: 03-13-2010
Location: Bethel, Alaska
-
To properly install a burner mat you need to clean the bottom of the burner pot. I use an electric drill and a silica pad. Wipe off the residue with MEK... -
Yes Bustech,
Replacing the burner mat and ring will get rid of that howling. Also, make sure you have no obstructions to the exhaust and...Leave a comment:
-
Now that I have been advised of a unit over firing on the East Coast, and one more in
Bethel Alaska, it is apparent that this is a Laser 730, Laser...Leave a comment:
-
-
Yes I would
Thank you,
TomLeave a comment:
-
PK,
Yes, a slight smell can come from the gaskets after a repair. What little grease they have will vaporize off very quickly (less than... -
Techeditor,
Very sorry to hear this. For some years now Toyotomi has slowly moved away from the user friendly outfit they used to be. For...Leave a comment:
-
TechEditor,
Since your heater is new, I would contact the dealer you bought it from and see about either a warranty or a fix for the high...Leave a comment:
-
machinist,
Did you have a chance to look at your new heater to see if it is glowing red on High?
TomLeave a comment:
No activity results to display
Leave a comment: