Announcement

Collapse
No announcement yet.

Unable to run A/C in fan only

Collapse

Forum Top GA Ad Widget

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Unable to run A/C in fan only

    I have Lennox central A/C unit with electric heater and I cannot run it in fan-only mode. When I turn on the fan, the outside unit turns on as well - the wires must be connected wrong...

  • #2
    Originally posted by moisha View Post
    I have Lennox central A/C unit with electric heater and I cannot run it in fan-only mode. When I turn on the fan, the outside unit turns on as well - the wires must be connected wrong...
    How many wires going to the stat and what post are they on.
    Also these same wires are on what post at the unit. I think you are saying you
    have a air handler with a air coil and electric heat?? Paul

    Comment


    • #3
      It could be that the two wires are shorted out in the wayy. Go to furnace and disconnect all the low coltage wiring to board with the power off. Put a jumper fom r to y and see fit he ac comes on then.

      Comment

      Working...
      X