Announcement

Collapse
No announcement yet.

material for making a burner mat / cloth for Monitor 40

Collapse

Forum Top GA Ad Widget

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • material for making a burner mat / cloth for Monitor 40

    Hello,

    Does anybody know where to get cloth material to fabricate my own burner cloth mat instead of buying a pre-cut one from Toyotomi?

    Please let me know.

    Thanks !!

    Moses

  • #2
    material

    check mcmaster-carr industrial supply [www dot mcmaster dot com]
    look for ceramic fiber sheet goods.

    Comment


    • #3
      material for making a burner mat / cloth for Monitor 40

      Originally posted by HayZee518 View Post
      check mcmaster-carr industrial supply [www dot mcmaster dot com]
      look for ceramic fiber sheet goods.
      Thanks for the info HayZee,

      There seems to be some products but I'm not sure what options are viable:
      www dot mcmaster dot com/#ceramic-sheets/=qjc49u

      would you please take a look at the website and let me know if you have any specific suggestions?

      maybe the "Very High Temperature Machinable High-Alumina Ceramic"? doesn't it need to look like a mesh?

      Moses

      Comment


      • #4
        Burner Mat Material

        Two years ago when I replaced the burn mat in my Monitor 422 I used silica cloth for the new burn mat. McMaster-Carr product number 8799K3. I also used Rutland 77 stove cement for gluing it to the bottom of the pot.
        Last edited by FordMan59; 02-04-2014, 01:55 PM.

        Comment


        • #5
          burner mat / cloth for Monitor 40

          Originally posted by FordMan59 View Post
          Two years ago when I replaced the burn mat in my Monitor 422 I used silica cloth for the new burn mat. Mc Master-Carr product number 8799K3. I also used Rutland 77 stove cement for gluing it to the bottom of the pot.

          You rock !
          Excellent, thank you very much.

          Do you have any recommendations for the material to make the round large gaskets for the heat chamber?


          Moses

          Comment


          • #6
            Gasket Material

            Originally posted by moses26 View Post
            You rock !
            Excellent, thank you very much.

            Do you have any recommendations for the material to make the round large gaskets for the heat chamber? Moses
            I used McMaster-Carr product number 9323K21. This material is thinner than the original Monitor gasket material and may need to be doubled on some applications, but it's a much stronger material than the original Monitor gaskets.

            Comment


            • #7
              burner mat / cloth for Monitor 40

              Originally posted by FordMan59 View Post
              I used McMaster-Carr product number 9323K21. This material is thinner than the original Monitor gasket material and may need to be doubled on some applications, but it's a much stronger material than the original Monitor gaskets.

              Ok ! thank you very much.

              Moses

              Comment

              Working...
              X