Tweet
Hey all. I have a submersible pump that is operated off from a pressure switch. For some reason the pump will shut off after pumping for just a couple of minutes even though the switch is still made. If i turn the switch off for about 10 minutes and flip back on the pump will begin working again for another couple of minutes. I then have to turn the switch off and start the process over. Any help or information on why this is happening would be appreciated. Thanks.
-
-
Do you have the pump specifications? If so, use a snap on ammeter and measure the pumps amp draw. It sounds like there may be a problem with the pump motor and it is drawing excessive current then shutting down on an internal thermal overload switch. -
Thanks. I'll see if I can find some more info on my pump and check that.Comment
Comment