Announcement

Collapse
No announcement yet.

toilet flapper problem

Collapse

Forum Top GA Ad Widget

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • toilet flapper problem

    My toilet was running continuously so I replaced the flapper and it doesn't leak anymore....however, now after I flush, the flapper doesn't fall back down and water just runs right through.

    Any ideas or suggestions?

    Chris.

  • #2
    Is the flapper hanging up or rubbing on anything? If so try to reposition it see it operates freely. If this isn't the case, I'd try buying a different type of flapper. Some are of better quality than others.

    Comment


    • #3
      Check the alignment of the flapper it may be too high or too low on the refill pipe.

      Comment


      • #4
        If its the style that slips over the two holders on the overflow tube take a drill bit or knife and open the holes a little bit so it swings freely. If its the style that has a rod attached to it you need to find out whats causing it to bind up and stick.

        Comment

        Working...
        X