Announcement

Collapse
No announcement yet.

Blower RPM

Collapse

Forum Top GA Ad Widget

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blower RPM

    The contractor who installed my central air didn't put a 2 speed motor on the furnace blower. He said he could put a sheve on that would work both for heating and cooling. But when the weather is below 40 degrees the furnace comes on and then shuts off after about 10 seconds. The second time it will stay running. I think the fan is running too fast and the furnace temperature is too low for the fan switch. I would like to put a 2 speed motor on the furnace, but I'm not sure how to size the sheve so the blower speed will be right for both heating and cooling. Any help appreciated.

  • #2
    Is the motor directly connected to a squirrel cage fan? Or is the fan and arbor remote from the motor?

    Comment


    • #3
      Fan

      The motor and squirrelcage are seperate. They have a pulleybelt between them. I think only one pulley was changed, but don't know which end and maybe both were changed

      Comment

      Working...
      X