Announcement

Collapse
No announcement yet.

M422 yellow start

Collapse

Forum Top GA Ad Widget

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • woodauger
    replied
    Thanks for the reply, i should have been more patient. It straightened out by itself and burns perfectly. Now back to the firewood pile

    Leave a comment:


  • hawkins111
    replied
    Do you have the Air Damper S part # 6209 installed in the air hose? If not you are getting too much air.

    Leave a comment:


  • woodauger
    started a topic M422 yellow start

    M422 yellow start

    I just renewed a 422 burner pot with advice from this site, including mat and gaskets. The ring was in good shape and reused. The heater starts horribly, witb yellow-blue around the flame ring, and a solitary high yellow flame under the window that extends nearly to window’s top. No soot visible in the chamber or at the exhaust. After warm up, it burns absolutely perfectly from then on. I don’t intend to reopen it without need, but like many of you I bought enough material to continue servicing both of my heaters, so some idea what might be avoidable next time would be welcome. Thanks for any input, Gary
Working...
X
=